ETSC
265 Three-Dimensional
Modeling (Using SolidWorks) Fall
Quarter 2017
Instructional Videos
-
Video 33, SolidWorks, How
to Create a Fan Blade and Pattern, or Similar Form, Using Solid & Surface
Lofts and Pattern (Optional). In this video we will
show you how to create a fan blade pattern or similar form using both a
simple solid loft (Lofted Boss/Base) and in comparison a Surface Loft with
Thickness and the advantages of each. We will also delve into how
to create some of the loft profile sketches.
-
Video 34, SolidWorks, How
to Convert a Part with Bends into a Sheet Metal Part, with a Flat Pattern
(Optional). In this video we will show you some basics
on how to convert a part that resembles something that can be made out
of sheet metal and convert it into a Sheet Metal part in SolidWorks
-
Video 35, SolidWorks, Spur
Gear Design Project, Pinion Gear, Gear Wheel, Base Plate and Assembly.
In this video, you learn what you need to do before
you start the Spur Gear Design Project and what to do afterward to get
the Physical Dynamics Motion that you need.
-
Video 36, SolidWorks, How
to Create a Design Table – automating Configurations for your Part, a Short
Tour. In this video we will have a short lesson
on how to create a Design Table, on a simple SolidWorks Part file.
A Design Table allows for the easy management and the generation of new
Part Configurations by changing cell values in an embedded Excel spread
sheet.
-
Video 37, SolidWorks, The
Versatile Rib Feature, The Quick and Easy – Down and Out Feature.
In this video we will apply the Rib Feature, the Versatile
– Quick and Easy – Down and Out SolidWorks Feature. With a minimal
amount of sketch geometry, typically lines and arcs, and underdefined at
first, you can concurrently extend a line to existing model surfaces and
at 90 degrees to that line, add a thickness and extrude that line up or
down to the next surface it encounters.
-
Guidance on the FDS Section
of the Grade Sheet - What's my Grade Gonna Be?